IMMFP 12 - Bailey Controls IMMFP 12 Processor Module - Multi-Function INFI 90...
- Part Number:
- IMMFP 12
- Model Number:
- IMMFP 12
- Make:
- BAILEY CONTROLS
- Lead Time:
- Available
- Qty In Stock:
- Available
Bailey Controls IMMFP 12 Processor Module - Multi-Function INFI 90 Processor Module Simple Type: System
The IMMFP12 Multi-Function Processor Module (MFP) is one of the workhorses of the INFI 90 OPEN control module line. It is a multiple loop analog, sequential, batch and advanced controller that provides powerful solutions to process control problems. It also handles data acquisition and information processing requirements providing true peer-to-peer communications. The comprehensive set of function codes supported by this module handles even the most complex control strategies. The INFI 90 OPEN system uses a variety of analog and digital I/O modules to communicate with and control the process. The MFP module communicates with a maximum of 64 modules in any combination (refer to Figure 1-1).
For Resellers and High Volume Orders:
Please request a quote to obtain preferred pricing.
Features
- 256 kilobytes of NVRAM memory.
- 512 kilobytes of RAM memory.
- A high speed redundancy link.
- A serial communication port for station support.
- Direct memory access circuitry.
- Two general purpose serial channels.
Specifications
- Air Quality: Noncorrosive
- Ambient Temperature: 0° to 70°C (32° to 158°F)
- Atmospheric Pressure: Sea level to 3 km (1.86 mi)
- Certification: CSA certified for use as process control equipment in an ordinary (nonhazardous) location. Factory Mutual approved for use in Class I, Division 2, hazardous locations.
- Dimensions: 35.56 mm wide (1.40 in.) | 177.80 mm high (7.00 in.) | 298.45 mm long (11.75 in.)
- Electromagnetic/Radio Frequency Interference: Values not available at this time. Keep cabinet doors closed. Do not use communication equipment any closer than 2 meters from the cabinet.
- Memory: Total: 512 kbytes ROM - 512 kbytes RAM - 256 kbytes NVRAM | Available: 347,712 bytes RAM - 194,752 bytes NVRAM
- Microprocessor: 32 bit processor (16 bit external bus) running at 16 MHz
- Mounting: Occupies one slot in a standard INFI 90 OPEN module mounting unit.
- Power Requirements: +5 VDC @ 2 A; 10 W typical
- Programmability: C, BASIC, BATCH, ladder, function codes, and user-defined functions.
- Redundant Communication Link Rate and Type: 1 Mbaud serial link.
- Relative Humidity: 5% to 95% up to 55°C (131°F)(noncondensing) | 5% to 45% above 55°C (131°F)(noncondensing)
- Serial Ports: Two RS-232-C ports, or one RS-485 and one RS-232-C port all of which link signals at a rate of up to 19.2 kbaud.
- Station Support: Sixty-four 40-kbaud serial stations (IISAC01) or eight 5-kbaud serial stations (NDCS03 or NDIS01).
Applications
- None Available
Aliases
- None Available
